Maserati Ghibli, Руководство пользователя

Страница: 253 / 308

The brake pads wear could cause the
fluid level to fall. However, low fluid
level may be caused by a leak and a
requires accurate checkup of the
braking system.
CAUTION!
The symbol on the tank cap
identifies the synthetic type of brake
fluid, distinguishing it from the
mineral type. Using mineral fluids
damages the special rubber linings of
the brake system irreparably.
WARNING!
• To avoid contamination from foreign
materials or moisture, use only new
brake fluid or fluid that has been in
a tightly closed container. Keep the
master cylinder reservoir cap
secured at all times. Brake fluid in an
open container absorbs moisture
from the air resulting in a lower
boiling point. This may cause it to
boil unexpectedly during hard or
prolonged braking, resulting in
sudden brake failure. This could
result in an accident.
• Overfilling the brake fluid reservoir
can result in spilling brake fluid on
hot engine parts, causing the brake
fluid to catch fire. Brake fluid can
also damage painted and vinyl
surfaces, make sure it does not spill
over these surfaces.
• Do not allow petroleum based fluid
to contaminate the brake fluid.
Brake seal components could be
damaged, causing partial or
complete brake failure. This could
result in an accident.
Adding Washer/Headlight Washer
Fluid
During scheduled services or when the
message “Low Washer Fluid” appears
together with the related telltale
add more fluid as soon as possible:
the fluid reservoir will hold nearly 4
Litres of washer/headlight washer
fluid.
• Remove the reservoir cap in the
engine compartment and lift the
filler neck.
• Fill the reservoir with windshield
washer solvent (refer to “Refillings”
in section 8) and operate the system
for a few seconds to flush out the
residual water.
• When refilling the washer fluid
reservoir, apply some washer fluid to
a cloth or towel and wipe the wiper
Maintenance and Care
7
251