Maruyama SSD600, Руководство по эксплуатации

Страница: 19 / 52

18 18 18 18
5
5 Installing/Removing the Sprayer on/from the Tractor
Warning
For safety reasons, one person should work alone to install or remove the sprayer on/from the tractor.
When installing or removing the sprayer on/from the tractor, make sure the main tank (chemical tank)
is empty. If the main tank (chemical tank) contains chemical or water, the center of gravity may shift
and cause the tractor to tip over.
When installing or removing the sprayer on/from the tractor, choose a location where the ground is
flat.
For the tractor on which to install the sprayer, follow the applicable tractors specified. Weights may
have to be prepared separately to be placed on the front. Before commencing work, check with the
dealer you purchased your machine from.
Installing the Sprayer on the Tractor
[1] Remove any implement currently installed on
the tractor. To install the tractor-trailed sprayer
on the tractor, use the supplied hitch pin.
[2] Align the hitch with the draw bar height.
You can adjust the height of the hitch by
inserting it in reverse.
[3] Keep the hitch length as short as possible to the
extent that it does not contact the tractor.
You can adjust the length of the hitch by
removing the two bolts securing the hitch. After
the adjustment, securely tighten the bolts
(torque: 117 N•m).
Warning
●
Be sure to secure the hitch with two bolts.
If the hitch is secured with only one bolt, the
hitch may come off and cause an unexpected
accident.
Hitch pin
R pin
Draw bar
Hitch
Hitch
M16 Bolt 2pcs.
M16 Washer 2pcs.
M16 Nut 2pcs.
Torque: 117 N
·
m
Low positon
High positon