Maruyama SSD600, Руководство по эксплуатации

Страница: 39 / 52

38 38 38 38
14
14 Stopping the Spraying
[1] When the spraying is done, set the spray cock
in the “Close” position.
[2] Turn the pressure adjustment dial
counterclockwise until it stops, to lower the
pressure.
Caution
[3] Idle the tractor engine.
[4] Stop the PTO of the tractor.
Caution
15
15 After Spraying
Cleaning the main tank (chemical tank)
[1] If chemical remains in the main tank (chemical
tank), put a container under the drain and
operate the drain cock to collect the remaining
chemical.
[2] Use clean water to flush the main tank
(chemical tank) thoroughly.
[3] Clean the strainer and line filter.
[4] Clean the water filter net in the main tank
(chemical tank).
[5] Fill the cleaning tank with clean water and turn
the feed valve to the cleaning tank position.
[6] Follow the spray procedure to spray from the
nozzle and clean inside the piping and nozzle.
Spray until all clean water in the cleaning tank is
consumed.
Caution
Other tasks
[1] Thoroughly wash the machine using clean
water.
[2] Return chemical to the storage cabinet and lock
the cabinet.
[3] Make an entry on the agrichemical use journal.
[4] Clean the containers used.
[5] Clean the protective gears.
[6] Take off the clothes and wash your body from
top to bottom.
[7] To store the machine, install the stands and
make sure the stands are contacting the
ground.
●
If the work is stopped without returning
the pressure adjustment dial to the 0
position, the spray pump may not suction
chemical the next time it is used.
●
Do not turn off the engine while the PTO is
still connected. It may cause the fan
transmission to malfunction.
●
Do not run the spray pump continuously
for 1 minute or more after clean water
has run out. The spray pump may
malfunction.