Maruyama SSD600, Руководство по эксплуатации

Страница: 24 / 52

23 23 23 23
(b) Changing the height
[1] Follow steps [1] to [3] in (a) to lift the
machine and loosen the axle bolts.
[2] Loosen the tire scraper bolts and shift them
to the rearmost positions.
[3] Pull out the axle completely. Switch the axle
at the top and bottom position, and insert in
the axle until the original tread is achieved.
[4] Follow steps [4] to [6] in (a) to secure the
axle and then slowly lower the sprayer.
[5] Change the axle position up/down in the
same manner on the opposite side.
[6] Secure the tire scraper bolts by making sure
the tire scrapers are away from the tires by
10 mm.
Caution
Be sure to insert the axle until the label is no
longer visible. If the axle is not fully
inserted, it may come off and cause an
unexpected accident.
Warning
Be sure to secure the axle with four bolts on
the bottom and side faces of each axle
bracket.
If the axle is secured with loose bolts, it may
come off and cause an unexpected accident.
Machine
height: High
Machine
height: Low
Tire scraper
Label