![background image](http://html1.mh-extra.com/html/martin/brush-cleaner/brush-cleaner_installation-instructions-manual_1732867009.webp)
© Martin Engineering GmbH
7
M3289UK-01/17
Introduction
2.3
Occupational safety
2.3.1
Safety information, occupational safety
These installation instructions must be read through in their entirety
before work may be started on the product or on the conveyor
system supplied by the customer.
The owner-operator must ensure that all installation, inspection and
maintenance work is performed solely by trained specialists.
Work on conveyor systems and their accessories must always be
performed during shut-down. The procedures described in the
applicable installation instructions for shutting down the conveyor
belt system must always be complied with.
All of the safety devices and safeguards must be reattached and/or
made operational again immediately following completion of the
work.
The installation must be carried out to completion before the system
is started up. The flawless execution of all operating steps must be
tested before the conveyor system can be started up again. Please
observe all information on the installation and start-up of the
product.
2.3.2
Duties of the owner-operator
This product's owner-operator must ensure that this product is
installed, serviced and used solely by those persons who
•
know the rules regarding occupational safety and accident
prevention,
•
were trained on using this product and have read and
understood these installation instructions.
2.3.3
Authorised personnel
Personnel are considered authorised when they have suitable
training and technical experience, can demonstrate knowledge of
the applicable standards and guidelines, and are able to evaluate
tasks in order to recognise critical situations at an early stage.
Operating, maintenance and installation personnel
Personnel are considered authorised when they have been trained
on using the product and have read and understood these operating
instructions in their entirety.