© Martin Engineering GmbH
31
M3289UK-01/17
Maintenance
8.
Remove all tools from the working area.
9.
Switch on the conveyor system.
10. Observe the brush cleaner and check its cleaning performance.
6.3
Replacement of the cleaning elements
NOTE
The bearings are lubricated for continuous operation, and relubri-
cation is not absolutely necessary. The bearings may need to be
relubricated under extreme conditions such as high temperatures,
temperature fluctuations and high dust exposure.
For example, the grease Arcanol MULTI2 (lithium soap on mineral
oil basis, viscosity at 40 °C >= ISO VG 68 mm²/s) can be used for
relubrication. This grease is suitable for temperatures from -30 °C
to +120 °C, or 75 °C continuous temperature. Refer to the corre-
sponding documentation of the pillow blocks for additional infor-
mation.
Relubrication intervals and quantities need to be defined as nee-
ded. The manufacturer specifies 60,000 h for speeds under
200 rpm.
WARNING! RISK OF INJURY!
Body parts and/or clothing may get caught and pulled in by
rotating parts or by the moving conveyor belt.
Do not touch or reach into the conveyor system or its accessories
during operation.
WARNING! RISK OF INJURY!
Body parts and/or clothing may get caught and pulled in by
rotating parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out, ensure
that all power sources to the conveyor belt system and its
accessories are switched off and secured against unauthorised
reactivation. Use warning signs!
