© Martin Engineering GmbH
23
M3289UK-01/17
Installation
5.2.7
Aligning the mainframe horizontally
Tab. 4: Aligning brush cleaner horizontally
1.
Align the mainframe horizontally with respect to the head pulley
and check whether the bristles rest evenly on the conveyor belt.
2.
Tighten the tensioner clamping screws.
Once the dimensions are correct and the secondary cleaner aligned,
this can be attached accordingly. If this is not the case, then the
mainframe must be reinstalled or repositioned.
Fig. 10:
Pos.
Description
1
Driving drum
2
Driving drum axis
3
Cleaning elements
4
Chute wall
WARNING! RISK OF INJURY!
The mainframe may not protrude more than 10 mm beyond the
chute wall. Otherwise there is a danger of injury from the rotating
shaft.
The shaft can only be shortened on the drive-facing side and not
on the drive side.
4
A
A
2
1
3
