![background image](http://html1.mh-extra.com/html/martin/brush-cleaner/brush-cleaner_installation-instructions-manual_1732867010.webp)
© Martin Engineering GmbH
8
M3289UK-01/17
Description of the product
3
Description of the product
3.1
Design and function
The product is provided especially for cleaning difficult profile belts,
e.g. chevron or slatted belts, and baked-on material. It is largely
used as a single cleaning system; can however also be used in
combination with a main cleaner.
The product installation is centred below the head pulley so as to
feed the bulk solid back into the material stream. If by the use of this
product, the material handling process is interrupted or the product
contaminated, the user is responsible for taking any counter
measures necessary.
Various bristle materials can be selected for a very large range of
applications. For this, there are two different materials (polyester
and brass) available that are specified in more detail in the technical
data sheet. These are available for selection in three different bristle
patterns (full, spiral-shaped and straight).
Only the same material and bristle pattern type can be used
together. A mixture of different material and bristle pattern is not
intended and must be checked in any individual case.
NOTE
An unfavourably or improperly installed product can disrupt the
conveyor process or contaminate the bulk material to be
transported.
The owner-operator is responsible for taking the required
countermeasures.
In the case of applications with contaminants, Martin Engineering
or one of its representatives can assist with the positioning or with
special solutions.