![background image](http://html1.mh-extra.com/html/martin/brush-cleaner/brush-cleaner_installation-instructions-manual_1732867006.webp)
© Martin Engineering GmbH
4
M3289UK-01/17
Introduction
2.1.4
Reference to additional documents
Reference is made in these installation instructions to the following
documents:
•
Installation instructions for the MARTIN
®
inspection door
Publication no. M3127.
•
Operating instructions for 3-phase motor DR.71-225, 315.
•
Installation and operating instructions for gearboxes of type
series R..7, F..7, k..7, S..7, SPIROPLAN
®
W
The following standards and directives were complied with in the
preparation of these installation instructions:
•
Machinery Directive (2006/42/EC)
•
ISO/IEC Guide 37 “Installation instructions for products
used by consumers”, 1995 Edition
•
DIN 1421 “Arrangement and numbering in texts”,
Edition 1983-01
•
DIN/EN/ISO 12100 “Safety of machinery - General
principles for design - Risk assessment and risk reduction”,
Edition 2011-03.
•
DIN/ISO 16016 “Technical product documentation -
Protection notices for restricting the use of documents and
products“, Edition 2007-12
•
DIN/EN 60204-1 “Safety of machines - Electrical
Equipment of Machines, Part 1: General requirements”,
Edition 2007-06
•
DIN/EN 1083-1; -2 Power-driven brushes Part 1:
Definitions and nomenclature” and “Part 2: Safety
requirements”, Edition 1997-07.
•
DIN EN 82079-1 - Creation of user manuals - Structuring,
content and presentation, Part 1 General principles and
detailed requirements.