Martin Brush Cleaner Скачать руководство пользователя

Страница: 41 / 50

M3289UK-01/17

Storage, de-installation, disposal

8.1

Packing and transportation

The products described here are packed and shipped by Martin
Engineering.

The products may be transported solely in the Martin Engineering
packaging.

The logistics company in charge of the shipment shall be
responsible for any damage and/or loss.

8.2

Storage

To ensure optimal function of the product, Martin Engineering
recommends storing its components in a dry place at room
temperature where they are protected against direct sunlight.

The best storage conditions are at temperatures ranging from +0 °C
to +30°C and 60% relative humidity.

Martin Engineering guarantees that the stored products will remain
fully functional for at least 2 years under the storage conditions
specified here.

8.3

De-installation

The de-installation is carried out in the reverse order to that of the
installation (see Section 5.2.2, page 15).

8.4

Disposal

Assemblies and/or single parts of the Martin Engineering products
must be professionally disposed of after usage as follows.

•

Complete assemblies must be dismantled, sorted by
material type, and separately disposed of.

Comply with all nationally and internationally applicable disposal
regulations when disposing of the product.

Содержание Brush Cleaner



















































Результаты поиска

Содержание Brush Cleaner

Отзывы:

Похожие инструкции для Brush Cleaner

Бренды по названию

Популярные бренды

Martin Brush Cleaner, Руководство по установке

Результаты поиска

Содержание Brush Cleaner

Отзывы:

Похожие инструкции для Brush Cleaner

Бренды по названию

Популярные бренды