manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 262

 

Glossary

 

G-6

 

29669/02080 Rev AG

 

Print Position Function Key

 

Allows you to adjust the print position. Access by first pressing the Print 
Settings function key and selecting the Character Width option. The system 
displays the Character Width screen, where you can press the Print Position 
function key.

 

Print Settings Functions

 

Allow you to change the character width and print position. Accessed by 
pressing the Print Settings function key from the home screen.

 

Print Trigger Option

 

Printheads option that allows you to specify either an internal or external 
photocell as the master printhead trigger. Access by pressing Set 
Up/Printheads/Print Trigger.

 

Printing Key

 

Controller keypad key that allows you to stop a message from printing. If 
the key LED is green, you can press the key to stop printing. If the LED is 
red, you can press the key to begin printing.

 

Product Counts Option

 

Current Message function that allows you to change product counts while a 
message is printing. Access by pressing the Current Message function key 
while a message is printing and selecting the Adjust Counts option from the 
resulting pop-up menu.

 

Prompt Option

 

In either an incrementing count or lots & boxes count screen, this option 
causes the system to always displays the following prompt whenever the 
count reaches its maximum: Reset Lots & Boxes?”. Accessed by pressing the 
Options function key and selecting the Prompt option. Also see Reset 
function key and Don’t Reset function key.

 

Purge (printhead) Option

 

Utility function that allows you to purge a VJ printhead. Access by pressing 
the Utility function key and selecting the Purge option.

 

Quit Option

 

Messages function that allows you to leave a message without saving any 
new or changed information. Access by pressing the Messages function key 
and selecting the Quit option from the resulting pop-up menu. Also see 
Cancel function key and Esc key.

 

Remove Head Function Key

 

In a purge printhead screen, allows you to remove a highlighted printhead 
from the purge process.

 

Reset Function Key

 

In a Product Counts screen, resets the highlighted field to the starting 
number.

 

Reset Option

 

In either an incrementing count or lots & boxes count screen, this option 
resets the count to the starting number after the message has been reloaded 
to print and printing begins again. Accessed by pressing the Options 
function key and selecting the Reset option.

 

Revert Option

 

Messages function that allows you to cancel your current changes and 
redisplay the last saved version of the message. Typically used when the 
Undo function key is not available. Access by pressing the Messages 
function key and selecting the Revert option from the resulting pop-up 
menu.

 

Rollover Hour Option

 

Set Up function that allows you to set the daily time that the printable day 
and date codes change. Access by pressing the Set Up function key and 
selecting the Rollover Hour option from the resulting pop-up menu.

 

Save Function Key

 

The system displays a “save changes” prompt when you try to leave a 
message without saving your changes. The Save function key is displayed 
to allow you to save your changes. Also see Don’t Save function key.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды