manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 145

Operations

29669/02080 Rev AG

4-73

Backing up PH Setup, Messages, and Logos to a Computer

Note: HR Series logos cannot be backed up using the Backup option. 

The Backup option allows you to store messages, VJ logos and printhead 
setup information on a computer for backup or duplication purposes. 
Follow the instructions below closely to know when to work from the 
controller and when to work from the computer. 

Note: Be sure to shut down the computer, and unplug the controller before 
connecting any cables.

To connect your computer to the controller, use a standard RS-232 cable. 
Plug the 25-pin connector into the controller. Plug the other end (depending 
on your computer, either a 25-pin or 9-pin connector) into the serial port on 
your computer. 

1) From the computer, access DOS with Windows not running. (See 

“Accessing DOS” on page 4-72.)

2) From the controller, press Utility. A menu is displayed.

3) Highlight Backup, then press Enter. A menu is displayed.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды