manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 147

Operations

29669/02080 Rev AG

4-75

Restoring PH Setup, Messages, and Logos

Use the Restore option to copy backed up printhead setup, message, or VJ 
logo files from a personal computer to either the controller that the files 
were copied from or to one or more other controllers. To restore files, you 
must first access DOS (see “Accessing DOS” on page 4-72). Follow the 
instructions below closely to know when to work from the controller and 
when to work from the computer.

Note: Be sure to shut down the computer, and unplug the controller before 
connecting any cables.

To connect your computer to the controller, use a standard RS-232 cable. 
Plug the 25 pin male D-type connector into the controller. Plug the other 
end (depending on your computer, either a 25 or 9 pin female D-type 
connector) into the serial port on your computer. 

From the computer:

1) Access DOS with Windows not running.

From the controller:

2) Press Utility. A menu is displayed.

3) Highlight Restore, then press Enter.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды