Operations
4-45
Verifying Message Setup
After saving a message, you will need to verify the proper placement of
your message on the product.
1) Print the message. (See “Printing a Message” on page 4-54.)
2) Check for proper placement of the message on the product.
3) If necessary, adjust the print position. (See Page 4-47.)
4) If proper placement cannot be achieved by adjusting the print position,
change the character width. (See Page 4-46.)
5) If necessary, adjust the print position again.
6) If proper placement still cannot be achieved, reposition the message
elements. (See “Moving an Element” on page 4-52.)
If you are using HR Series printheads, and are unable to achieve proper
placement after performing the above procedures, you may need to adjust
the aspect ratio at the printhead setup screen. (See “Aspect Ratio” on
page 4-12.)
Содержание PatrionPlus
