Marsh PatrionPlus Скачать руководство пользователя страница 146

Страница: 146 / 269

Operations

4-74

29669/02080 Rev AG

4) Highlight either PH Setup, Messages, or Logos, then press Enter. The

system prompts you to run the Marsh Backup/Restore program,
BKUPREST, on your computer.

From the computer:

5) Insert the backup/restore program disk into the floppy drive. (See the

Parts List for ordering information or contact your local distributor.)
You may run the program from here or copy the program onto a
another drive.

6) At the DOS prompt, type BKUPREST, then press Enter. The system

displays the program name and version number.

7) At the Select Backup (B) or Restore (R) prompt, type B, then press

Enter

Note: Press Ctrl C at any time to stop the Backup/Restore Program.

8) Type in 1 or 2 for the appropriate Com Port, then press Enter. If it is

valid, the system will display the address. If it is not, the system will
say Com Port Not Found. If not found, enter a different Com Port.

9) Type in the file name (you may also specify the drive and the

directory), then press Enter. The message is displayed.

From the controller:

10) Press Backup.

11) Press Backup or Enter. The controller displays the number of backed

up files. The computer will check the files received and then display
File Verification Successful or File Verification Failed. If failed, redo the
backup procedures.

Note: To exit without backing up the files, press Cancel.

Содержание PatrionPlus














































































































































































































































































Результаты поиска

Содержание PatrionPlus

Отзывы:

Бренды по названию

Популярные бренды

Marsh PatrionPlus, Техническое руководство

Результаты поиска

Содержание PatrionPlus

Отзывы:

Бренды по названию

Популярные бренды