manualshive.com logo in svg

Marsh PatrionPlus, Техническое руководство

Поделиться
Скачать
Marsh PatrionPlus Скачать руководство пользователя страница 119

Operations

29669/02080 Rev AG

4-47

Adjusting the Print Position

Adjusting the print position changes the horizontal placement of the entire 
message on your product. Only the message currently displayed on the 
home screen will be affected. 

Note: The print position setting is intended to make make minor horizontal 
shifts in print placement. Make sure your printhead offset has been set 
accurately before adjusting the print position. (See “Offset Value” on 
page 4-12.)

1) From the home screen, press Print Settings. The Character Width 

screen is displayed.

2) Press Print Position. The Print Position screen is displayed.

3) Press Left to Right to set the conveyor direction for the printhead. 

View the conveyor from behind the printhead to determine direction.

4) Change the print position.

• To move left or right one space, press Move Left or Move Right.

• To move left or right ten spaces, press Shift-Move Left or 

Shift-Move Right

.

• To return to the original print position, press Undo.

5) Press OK to save your changes and return to the home screen.

Содержание PatrionPlus














































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды