52
The TDM SyncBus – Example 1
The situation
You have created a pretty large setup using Mixer and Output Control: via
all physical outputs single signals are playing back – the outputs are all
occupied. Additionally you created a stereo master sum and several aux-
sums. The question arises: where and how could those mix-signals be
monitored, even though all physical outputs of the card are already in use?
The solution
Use another TRACE PRO AE and the TDM SyncBus! In the Output
Control of card 1, click on “Master” in the TDM Out 1 and activate the bus
with the “On” button. The master sum is now lead to TDM channel 1. In
the Output Control of the card 2 click on “Input” and choose “TDM IN 1”
in the channel where you wish the signal to appear – finished! Now the
master sum is monitored on the second TRACE PRO AE.
You may proceed similar with the aux-sums using the remaining TDM
channels.
