51
The software
You need a multitrack-capable software, which
can reliably record the audio signals of the
CE PRO AE. The software communicates
he TRACE PRO AE via the audio driver.
In our example there are actually two that would
apply: the “classical” MME drivers, or the ASIO
drivers.
TRA
with t
Z
This could be e.g.
Emagic Logic Audio,
Magix Samplitude,
Cakewalk Sonar,
Steinberg Cubase, Adobe
Audition…
The setup
Since, when recording, the audio data has to be
transported between the harddrive of the
computer and the TRACE PRO AE distortion-
e and error-less, the audio latency has to be
adjusted perfectly. Check the corresponding
settings! Choose bigger values (e.g. 10-20ms) to
keep the system load small. Start your preferred
audio application and choose the “ASIO TRACE
PRO AE”-driver or the Multimedia driver, in
“Audio Settings” or “Audio Options” from
within the software. The in- and outputs of the
TRACE PRO AE appear in the format “Analog
IN (MME)” Using the ASIO driver, all wanted
in- and outputs have to be activated via the
ASIO device setup. Using the multimedia driver,
all wanted in- and outputs are commonly
activated via the audio software. Set up the
latency for MME/ASIO. Again: rather enter
bigger or more buffers, for a more relaxed
system load.
fre
Z
We urgently
recommend activating the
options “Classical MME-
driver” and “Start/Stop
Synchronization” within
the TRACE PRO AE
manager.
Z
See section “Audio
Latency” in “The TRACE
PRO AE Settings”!
Z
Read section “Setting
up the latency of the
TRACE PRO AE.
Create the desired number of tracks in the
software and assign them to the different inputs
of the TRACE PRO AE. Put the tracks to record
ready, push “record” and there you go…!
