Maple Systems BLU300 Series, Инструкция по установке и эксплуатации

Страница: 91 / 141

10. In the Label: box, you can enter text that is displayed when the state is valid. The length of the text
string is limited to the size and type of font you have selected and the width of the OIT screen. For
example, for font MS Serif 6, a maximum of 32 characters can be used.
11. In the BMP Read box select a bitmap for each state. This is done by clicking on the directory
button to display the BmpGroup library directory:
12. Click on any of the listed subdirectories. Select the bitmap you wish to use, then click Open . Click
OK to accept the settings and go back to the Edit Multi-State Bitmap State Table dialog box.
13. Click OK . The Multi-State Bitmap Object is displayed on the main screen of BlueLeaf with the
appropriate bitmap displayed. If necessary, use the mouse to drag the part to the location on the
window that you want it. Note: the Multi-State Bitmap object can be resized once placed on the screen
to fit the largest bitmap in the series. Simply click the up/down arrows of the State: box while the
Multi-State Object is highlighted to scroll through each state. When the largest bitmap is displayed,
click on the small white boxes located around the perimeter of the selected object to resize the object.
The Clock Display Object
The Clock Display Object is used to display the time and/or date using the OIT’s built-in clock or by reading a PLC register.
4
To create a Clock Display Object
1. From the
OBJECTS
menu, click Clock Display . Or click the Clock Display icon in the Objects toolbar.
The mouse cursor changes to a crosshair. Select the location on the screen to place the Clock Display
and left click the mouse to place a Clock Display object on the screen. Move the mouse cursor over
1010-0300, Rev 02
Using Dynamic Objects 89