manualshive.com logo in svg

Manitowoc QC0700, Руководство по обслуживанию

Поделиться
Скачать
Manitowoc QC0700 Скачать руководство пользователя страница 11

Section 1

General Information

Part No. 80-1214-3

1-3

Owner Warranty Registration Card

GENERAL

Warranty coverage begins the day the ice machine is 
installed.

If the OWNER WARRANTY REGISTRATION CARD is 
not returned, Manitowoc will use the date of sale to the 
Manitowoc Distributor as the first day of warranty 
coverage for your new ice machine.

Warranty Coverage 

GENERAL

The following Warranty outline is provided for your 
convenience. For a detailed explanation, read the 
warranty bond shipped with each product.

Contact your local Manitowoc Distributor or Manitowoc 
Ice, Inc. if you need further warranty information.

PARTS

1. Manitowoc warrants the ice machine against defects 

in materials and workmanship, under normal use 
and service for two (2) years from the date of original 
installation.

2. The compressor is covered by an additional three 

(3) year (five years total) warranty beginning on the 
date of the original installation.

LABOR

1. Labor required to repair or replace defective 

components is covered for two (2) years from the 
date of original installation.

EXCLUSIONS

The following items are not included in the ice machine’s 
warranty coverage:

1.

Normal maintenance

, adjustments and cleaning as 

outlined in this manual.

2. Repairs due to unauthorized modifications to the ice 

machine or use of non-standard parts without prior 
written approval from Manitowoc Ice, Inc.

3. Damage caused by improper installation of the ice 

machine, electrical supply, water supply or drainage, 
or damage caused by floods, storms, or other acts of 
God.

4.

Premium labor rates

 due to holidays, 

overtime

, 

etc.; travel time; flat rate service call charges; 
mileage and miscellaneous tools and material 
charges not listed on the payment schedule. 
Additional labor charges resulting from the 
inaccessibility of equipment are also excluded.

5. Parts or assemblies subjected to misuse, abuse, 

neglect or accidents.

6. Damage or problems caused by installation, 

cleaning and/or maintenance procedures 
inconsistent with the technical instructions provided 
in this manual.

7. This product is intended exclusively for commercial 

application. No warranty is extended for personal, 
family, or household purposes.

Important

Complete and mail the OWNER WARRANTY
REGISTRATION CARD as soon as possible to
validate the installation date.

Important

This product is intended exclusively for commercial
application. No warranty is extended for personal,
family, or household purposes.

Revised 8/2003

Содержание QC0700























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды