manualshive.com logo in svg

Manitowoc Grove GRT8120, Руководство оператора

Поделиться
Скачать
Manitowoc Grove GRT8120 Скачать руководство пользователя страница 97

Grove

Published 3-22-2021, Control # 702-02

3-23

GRT8120 OPERATOR MANUAL

OPERATING CONTROLS AND FEATURES

3

speed to increase to 950 rpm. Disabling all craning functions
will cause the engine speed to decrease to 800 rpm.

Luffing Jib Enable/Disable Switch (Optional)

The Luffing Jib Enable/Disable Switch (9, Figure 3-9)
(Optional) is a two-position momentary switch that is located
on the right armrest. 

Push switch one time to enable the luffing jib function. Push
switch again to disable the luffing jib function.

The Luffing Jib Enable/Disable Indicator shows green in the
Status Bar (Figure 4-73) of the Operator Display Module
(ODM) when the luffing jib function is enabled. The indicator
goes off when the luffing jib function is disabled.

Boom Telescope Enable/Disable Switch

The Boom Telescope Enable/Disable Switch (10, Figure 3-9)
is a two-position momentary switch that is located on the left
armrest. 

Push switch one time to enable the boom telescope function.
Push switch again to disable the boom telescope function.

The Telescope Enable/Disable Indicator shows green in the
Status Bar (Figure 4-73) of the Operator Display Module
(ODM) when the telescope function is enabled. The indicator
goes off when the telescope function is disabled.

Enabling one craning function (hoist, lift, telescope, or swing)
using its related Enable/Disable Switch will cause the engine
speed to increase to 950 rpm. Disabling all craning functions
will cause the engine speed to decrease to 800 rpm.

Boom Lift Enable/Disable Switch

The Boom Lift Enable/Disable Switch (11, Figure 3-9) is a
momentary switch that is located on the right armrest. 

Push switch one time to enable the boom lift function (boom
up and boom down). Push switch again to disable the boom
lift function.

The Boom Lift Enable/Disable Indicator shows green in the
Status Bar (Figure 4-73) of the Operator Display Module
(ODM) when the boom lift function is enabled. The indicator
goes off when the boom lift function is disabled.

Enabling one craning function (hoist, lift, telescope, or swing)
using its related Enable/Disable Switch will cause the engine
speed to increase to 950 rpm. Disabling all craning functions
will cause the engine speed to decrease to 800 rpm.

Seat Lumbar Support Adjustment Lever

The Seat Lumbar Support Adjustment Lever (12, Figure 3-9)
is located at the right side of the seat backrest. 

The lever can be set to three lumbar support positions.

Rotate lever clockwise to increase the lumbar support.
Rotate lever counterclockwise to reduce the lumbar support.

Seat Slide Lever

The Seat Slide Lever (13, Figure 3-9) is located at the lower
front of the seat. 

Push Seat Slide Lever to the left and hold to allow the seat to
be moved forward or backward relative to the armrests.
Release lever when the seat is in the desired position. Make
sure that seat has reached a locked position.

Auxiliary Hoist Enable/Disable Switch

The Auxiliary Hoist Enable/Disable Switch (14, Figure 3-9) is
a two-position momentary switch located on the left armrest. 

Push switch one time to enable the auxiliary hoist function.
Push switch again to disable the auxiliary hoist function. 

Quickly push the switch two times to enable the auxiliary
hoist function at high speed. Pushing and holding the switch
for approximately 2 seconds will also enable the auxiliary
hoist function at high speed.

The Auxiliary Hoist Enable/Disable Indicator shows green in
the Status Bar (Figure 4-73) of the Operator Display Module
(ODM) when the auxiliary hoist function is enabled. The
Indicator goes off when the auxiliary hoist function is
disabled.

The Auxiliary Hoist High Speed Indicator in the Status Bar
(Figure 4-73) comes on when the high speed function is
enabled.

Enabling one craning function (hoist, lift, telescope, or swing)
using its related Enable/Disable Switch will cause the engine
speed to increase to 950 rpm. Disabling all craning functions
will cause the engine speed to decrease to 800 rpm.

Cab Tilt Switch

The Cab Tilt Switch (15, Figure 3-9) is located on the left
armrest. 

The switch is a three-position, momentary rocker switch that
is used to tilt the cab up for easy viewing of an elevated
boom and load. 

Push and hold rear of switch to tilt the cab up. Push and hold
front of switch to tilt the cab down. Release switch when cab
is tilted to the desired position.

When cab is tilted up, the Cab Not Fully Lowered Alert in the
Alerts Area (Figure 4-68) of the Operating Display Module
(ODM) comes on (amber). 

NOTE:

Cab must be in the fully lowered position for the
drive functions to be enabled.

Содержание Grove GRT8120

































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды