manualshive.com logo in svg

Manitowoc Grove GRT8120, Руководство оператора

Поделиться
Скачать
Manitowoc Grove GRT8120 Скачать руководство пользователя страница 213

Grove

Published 3-22-2021, Control # 702-02

4-83

GRT8120 OPERATOR MANUAL

OPERATING PROCEDURES

4

6

WRL Radius Enabled 
Indicator (Green)

Indicates that the minimum boom angle limit, the maximum boom 
angle limit, or both the minimum and maximum boom angle limits 
are defined.

WRL Radius Warning 
Indicator (Amber)

Indicates the boom radius is within 3 m (10 ft) of a radius limit 
setpoint. 
The warning buzzer slowly beeps when the boom radius is within 
3 m (10 ft) of the radius limit setpoint and changes to a fast beep 
when the radius is within 1.5 m (5 ft) of the radius limit setpoint.

WRL Radius Stop 
Indicator (Red)

Indicates the boom radius is at a radius limit setpoint. The warning 
buzzer is on (constant). 
For cranes that are equipped with the WRL Lock Out Function, the 
boom up and telescope in, or boom down and telescope out, crane 
functions are locked out, depending upon which limit is reached.

6

WRL Swing Enabled 
Indicator (Green)

Indicates the left and right swing angle limits are defined.

WRL Swing Warning 
Indicator (Amber)

Indicates the swing angle is within 10° of a swing angle limit setpoint. 
The warning buzzer slowly beeps when the swing angle is within 10° 
of the swing angle limit setpoint and changes to a fast beep when 
the swing angle is within 5° of the swing angle limit setpoint. 
For cranes that are equipped with the WRL Lock Out Function, when 
the swing angle is within 10° of the swing angle lock out setpoint, the 
swing function commanded by the controller may be reduced or 
suspended depending upon the weight of the load and the swing 
speed.

Warning

Due to the free-swing characteristic of the superstructure, the
boom and load can potentially swing past the swing angle
setpoint, even if the swing function commanded by the
controller is reduced or suspended (locked out) by the WRL.
This can happen for several reasons, including how level the
crane is and environmental conditions, such as wind speed.

WRL Swing Stop 
Indicator (Red)

Indicates the swing angle is at a swing angle limit setpoint. The 
warning buzzer is on (constant).
For cranes that are equipped with the WRL Lock Out Function, the 
swing left or swing right crane function is locked out, depending 
upon which limit is reached.

Item

Name

Symbol

Description

Содержание Grove GRT8120

































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды