manualshive.com logo in svg

Manitowoc Grove GRT8120, Руководство оператора

Поделиться
Скачать
Manitowoc Grove GRT8120 Скачать руководство пользователя страница 52

SAFETY INFORMATION

GRT8120 OPERATOR MANUAL

2-28

Published 3-22-2021, Control # 702-02

The following standards and regulations regarding personnel
handling are available by mail at the following addresses:

•

ASME (formerly ANSI) B30 Series American National
Safety Standards For Cableways, Cranes, Derricks,
Hoists, Hooks, Jacks, and Slings

; 

ASME B30.5, Mobile

And Locomotive Cranes, and ASME B30.23, Personnel
Lifting Systems

, are available by mail from the ASME, 22

Law Drive, Fairfield, New Jersey, 07007-2900.

- or - check online at:

https://www.asme.org/codes-standards/find-codes-
standards

•

US DOL/OSHA Rules and Regulations

 are available

by mail from the Superintendent of Documents,
PO Box 371954, Pittsburgh, PA, 15250-7954.

ENVIRONMENTAL PROTECTION

Dispose of waste properly!

 

Improperly disposing of waste

can threaten the environment.

Potentially harmful waste used in Grove cranes includes, but
is not limited to, oil, fuel, grease, coolant, air conditioning
refrigerant, filters, batteries, and cloths which have come into
contact with these environmentally harmful substances.

Handle and dispose of waste according to local, state, and
federal environmental regulations.

When filling and draining crane components, observe
the following:

•

Do not pour waste fluids onto the ground, down any
drain, or into any source of water.

•

Always drain waste fluids into leak proof containers that
are clearly marked with what they contain.

•

Always fill or add fluids with a funnel or a filling pump.

•

Immediately clean up any spills.

MAINTENANCE

The crane must be inspected prior to use on each work shift.
The owner, user, and operator must make sure that routine
maintenance and lubrication are being dutifully performed.

Never

 operate a damaged or poorly maintained crane.

Grove continues to recommend that cranes be properly
maintained, regularly inspected and repaired as necessary.
Grove reminds crane owners to make sure that all safety
decals are in place and legible. Grove continues to urge
crane owners to upgrade their cranes with rated capacity
limiter and control lever lockout systems for all lifting
operations.

Shut down the crane while making repairs or adjustments.

Always perform a function check after repairs have been
made to ensure proper operation. Load tests should be
performed when structural or lifting members are involved.

Follow all applicable safety precautions in this manual when
performing crane maintenance as well as crane operations.

Keep the crane free of mud, dirt, and grease at all times.
Dirty equipment introduces hazards, wears-out faster, and
makes proper maintenance difficult. Cleaning solutions used
should be non-flammable, non-toxic and appropriate
for the job.

Routine maintenance and inspection of this crane must be
performed by a qualified person(s) according to the
recommendations in the 

Inspection and Lubrication Service

Log.

 Any questions regarding procedures and specifications

should be directed to your Grove distributor.

Service and Repairs

Service and repairs to the crane must only be performed by a
qualified person. All service and repairs must be performed
in accordance with manufacturer’s recommendations, this
manual, and the service manual for this machine. If there is
any question regarding maintenance procedures or
specifications, contact your Grove distributor for assistance.

Qualified person

 is defined as one who by reason of

knowledge, training and experience is thoroughly familiar
with the crane’s operation and required maintenance as well
as the hazards involved in performing these tasks.

Training and qualification of maintenance and repair
personnel are crane owner’s responsibility.

All replacement parts must be Grove approved.

Any modification, alteration, or change to a crane which
affects its original design and is not authorized and approved
by Grove is 

strictly prohibited

. Such action invalidates all

warranties and makes the owner/user liable for any
resultant accidents.

Hydraulic Fluid

•

Do not use your hand or any part of your body to check
for hydraulic fluid leaks when the engine is running or
the hydraulic system is under pressure. Fluid in the
hydraulic system can be under enough pressure that it
will penetrate the skin, causing serious injury or death.
Use a piece of cardboard, or piece of paper, to search

WARNING

Fall Hazard!

Working at elevated heights without using proper fall
protection can result in severe injury or death.
Always use proper fall protection as required by local,
state or federal regulations.

Содержание Grove GRT8120

































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды