Manitowoc Grove GRT8120, Руководство оператора

Страница: 289 / 448

Grove
Published 3-22-2021, Control # 702-02
4-159
GRT8120 OPERATOR MANUAL OPERATING PROCEDURES
4
When re-entering the rigging mode completely, you can
prevent already entered components from changing by
making entries in the following order:
- Counterweight (2, Figure 4-177)
- Boom system (1)
- Outrigger span (3)
In this order, the values that can be selected for the current
entry are always restricted by the previous entry. As a result,
already entered values do not change.
When entering the components, the corresponding RCL
code (6) is displayed at the same time.
Then you must enter the current hoist selection (4) and
reeving (5) and confirm the indicated rigging mode (7).
Switching on Input Mode
• Select one of the desired components (1, Figure 4-177)
to (4).
The corresponding symbol goes orange.
• Confirm the selection.
Direction arrows appear on the display.
Input mode is switched on.
Selecting Values
With the input mode switched on, you can select values that
are permissible according to the Lifting Capacity Table.
The selection process is described using reeving as an
example.
• Select and confirm the symbol (1, Figure 4-179) –
arrows on the left and right are displayed.
• Select using the left or right buttons on the control panel
until the display shows the rigged reeving.
• Confirm the selection.
T h e d i s p l a y s h o w s t h e c o r r e s p o n d i n g R C L c o d e
(2, Figure 4-179).
You can cancel the input at any time. Press button
(1, Figure 4-180) or (2).
FIGURE 4-177
6
5
2 3
4
1 1
1
7
1
10254-47a
FIGURE 4-178
1
1
1
2
3
4
10254-47a
FIGURE 4-179
1
2
10254-48a
8849-31
FIGURE 4-180