Manitou MLT 961-145 V PLUS L JD ST4 S1, Руководство оператора

Страница: 99 / 180

2 - 63
2 - ELECTRICAL ADJUSTMENT OF THE MAIN RIGHT REAR VIEW MIRROR
Knob 1 iden tifies the c ontrol adjusting the external rear view mirror 2 to improve visibility.
Adjusting the external mirror:
Turn knob 1 to the appropriate position (arrow 1a on knob as in the image).
The external rearview mirror can be adjusted from this position by moving the knob control in
the desired direction.
3 - SEMI-AUTOMATIC WHEEL ALIGNMENT
t
IMPORTANT
t
Before travelling on the road, check the alignment of the rear wheels and set the two front wheels as directional.
The alignment of the rear wheels must be regularly checked using the green lights while driving the telehandler.
It is not possible to change the steering mode above 11 km/h
In case of faults, contact your dealer.
WHEEL ALIGNMENT GREEN INDICATOR LIGHTS
These green lights come on to indicate the alignment of the wheels in relation to the
telehandler. Indicator light A1 is for the front wheels and indicator light A2 for the rear
wheels.
CHANGING THE STEERING MODE
Directional front wheels (road travel).
Directional front and rear wheels in opposite directions (decreased turning
radius).
Directional front and rear wheels in the same direction (lateral movement).
Front drive wheels and locking of the rear wheel steering angle.
-Align the rear and front wheels.
-Select the desired steering mode; the flashing light confirms the selections.
-Direct the wheels according to the information display instructions. The indicator light becomes steady when the steering
mode is active.
2
1
1a
A1
A2