Manitou MLT 961-145 V PLUS L JD ST4 S1, Руководство оператора

Страница: 84 / 180

2 - 48
23 - CVT TRANSMISSION AND DRIVING MODE
The machine is equipped with a CVT transmission ( continuously variable transmission ) that ensures the following:
• ease of use: speed can be managed between 0 and 40 km/h without changing gear, simply by operating on the
accelerator pedal, always maintaining the best available torque to the wheels,
• very high pulling force for all heavy-duty loading operations,
• maximum comfort due to the transmission that allows maximum sensitivity and accuracy, also taking advantage of
a significant engine brake.
Furthermore, some driving modes can be set to adapt the machine to specific needs.
DRIVING MODE
Speed limiter:
allows the maximum travel speed to be adjusted.
When required, the maximum torque and hydraulic flow performance
to move the telescopic boom are available without increasing the set
travel speed.
Conditions and setting
:
-move the forward/neutral/reverse gear selection (F/N/R) to the neutral
position (N),
-with the I.C. engine on, actuate potentiometer "C" that allows adjusting
the maximum travel speed from 0% to 100%, checking the desired
speed on the display;
-press the accelerator pedal to move the machine.
Handling and road travel mode:
the operator can select the operating mode that meets his needs.
-
The handling mode
allows having the maximum progression and torque performance for all heavy duty handling and
loading operations.
-
The road travel mode
, which is much more dynamic and fast, is ideal for all other uses, where speed is important.
In both modes, the maximum travel speed is 40 km/h.
Select the operating mode:
-press the key briefly, LED on, to enable the handling mode;
-press the key briefly, LED off, to enable the road travel mode;
-press the accelerator pedal to move the machine.
SET mode
A further setting is available to simplify specific repeated actions: the SET function.
This function stores the desired travel speed and engine speed to use, for example, a silage unloading bucket, a spreader, a
plough, etc...
Conditions and setting
:
-forward/neutral/reverse gear selection (F/N/R) to the neutral position (N),
-I.C. engine on,
-briefly press the key
to display the "stored function settings" (the display lasts for 4 seconds):
• maximum travel speed,
• desired engine speed;
-the operator can select whether to confirm or end the stored functions;
-in order to confirm the stored functions, press the key on the "Button panel and keyboard" to enable the SET
mode (the LEDs of the keys + turn on, the engine speed stabilises to the stored value, the maximum allowed
speed for the accelerator control is the stored speed);
A
B
C
649100 EN-US-AU (20/05/2019) MLT 961-145 V PLUS L JD ST4 S1