manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Руководство оператора, Страница: 61 / 180

Поделиться
Скачать
Manitou MLT 961-145 V PLUS L JD ST4 S1 Скачать руководство пользователя страница 61

2 - 25

LONGITUDINAL ADJUSTMENT

 -Insert the locking lever 5 in the desired position. After it has been locked, it will not allow further movements of the seat.

MAINTENANCE

t

 IMPORTANT 

t

Risks of accident increase when the backseat tilts!

Dirt can impair proper operation of the seat. Therefore it must always be kept clean.

 -To clean or replace the cushions, just pull them out of the frame of the seat.

 -Avoid wetting the fabric of cushions during cleaning. First check on a hidden area how the fabric reacts to normal fabric 

and plastic detergents.

DRIVER'S PNEUMATIC SEAT "ÉLITE"

FOR GREATER COMFORT, THIS SEAT ALLOWS SEVERAL ADJUSTMENTS.

SEAT WEIGHT AND HEIGHT ADJUSTMENT

t

 IMPORTANT 

t

To prevent any damage, do not activate the compressor for more than 1 minute.

ADJUSTING THE WEIGHT
Adjust the seat for the driver's weight by sitting on it.

 -Switch on lift truck ignition.

 -Pull lever 1 slightly upward to automatically adjust the seat according to the weight.

NOTE:  To avoid health problems, we recommend checking and adjusting the weight 

before starting the lift truck.

SEAT HEIGHT ADJUSTMENT

 -Pull or push lever 1 fully to change the height of the seat. When the upper or lower 

limit switch is reached, the height is automatically adjusted to ensure a minimal 

dampening travel.

HORIZONTAL DAMPER

In certain conditions (e.g. driving with a trailer) it is advised to use the horizontal shock absorber 2. The driver' seat will be 

able to dampen shocks in the travelling direction better.

• Position A: damper disengaged.

• Position B: horizontal damper engaged.

EXTENDING THE BACK-REST

 -The height of the back-rest 3 can be adjusted by pulling it upwards (the notches will click) up to the stop.

 -The back-rest can be removed by applying sufficient pressure to pull it off the stop.

BACK-REST ANGLE ADJUSTMENT

t

 IMPORTANT 

t

If the back of the seat is not supported during adjustment, it will fully tilt forward.

 -Lean against the back, pull the lever 4 and move the back of the seat to the desired position.

LONGITUDINAL ADJUSTMENT

 -Insert the locking lever 5 in the desired position. After it has been locked, it will not allow further movements of the seat.

LUMBAR ADJUSTMENT

This allows improving the comfort of the seat and the freedom of movement of the driver.

 -Turn knob 6 to the right or to the left to adjust the lumbar support height and depth.

MAINTENANCE

t

 IMPORTANT 

t

Risks of accident increase when the backseat tilts!

Dirt can impair proper operation of the seat. Therefore it must always be kept clean.

 -To clean or replace the cushions, just pull them out of the frame of the seat.

 -Avoid wetting the fabric of cushions during cleaning. First check on a hidden area how the fabric reacts to normal fabric 

and plastic detergents.

1

5

3

4

2

A

B

6

Содержание MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Отзывы:

Нет отзывов