manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Руководство оператора

Поделиться
Скачать
Manitou MLT 961-145 V PLUS L JD ST4 S1 Скачать руководство пользователя страница 2

IMPORTANT

Carefully read and understand this instruction manual before using the telehandler.

It contains all information relating to operation, handling and telehandler equipment,  

as well as important recommendations to be followed.

This document also contains precautions for use, as well as information on the servicing and routine maintenance required  

to ensure the telehandler's continued safety of use and reliability.

WHENEVER YOU SEE THIS SYMBOL IT MEANS:

t

 IMPORTANT 

t

WARNING ! BE CAREFUL ! YOUR SAFETY OR THE SAFETY OF THE TELEHADLER IS AT RISK.

 -This manual has been produced on the basis of the equipment list and the technical characteristics 

given at the time of its design.

 -The level of equipment of the telehandler depends on the options chosen and the country of sale.

 -According to the telehandler options and the date of sale, certain items of equipment/functions 

described herein may not be available.

 -Descriptions and figures are non binding.

 -MANITOU reserves the right to change its models and their equipment without being required to 

update this manual.

 -The MANITOU network, consisting exclusively of qualified professionals, is at your disposal to answer 

all your questions.

 -This manual is an integral part of the telehandler.

 -It is to be kept in its storage space at all times for ease of reference.

 -Hand this manual to the new owner if the telehandler is resold.

CALIFORNIA PROPOSITION 65 WARNINGS

WARNING

This product can expose you to lead which is known to the State of California to cause cancer and birth defects or other 

reproductive harm.
For more information go to www.P65Warnings.ca.gov

WARNING

Breathing diesel engine exhaust exposes you to chemicals known to the State of California to cause cancer and birth defects 

or other reproductive harm.

- Always start and operate the engine in a well-ventilated area.

- If in an enclosed area, vent the exhaust to the outside.

- Do not modify or tamper with the exhaust system.

- Do not idle the engine except as necessary.

For more information go to www.P65Warnings.ca.gov/diesel

649100 EN-US-AU (20/05/2019)

MLT 961-145 V PLUS L JD ST4 S1

Содержание MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды