manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Руководство оператора, Страница: 111 / 180

Поделиться
Скачать
Manitou MLT 961-145 V PLUS L JD ST4 S1 Скачать руководство пользователя страница 111

3 - 3

MANITOU ORIGINAL SPARE PARTS AND EQUIPMENT

OUR FORKLIFT TRUCKS MUST BE SERVICED USING ORIGINAL MANITOU PARTS.

IF YOU USE PARTS WHICH ARE NOT ORIGINAL MANITOU PARTS, YOU RISK:

t

 IMPORTANT 

t

THE USE OF COUNTERFEIT PARTS OR COMPONENTS NOT APPROVED BY THE MANUFACTURER MEANS YOU LOSE THE RIGHT TO THE CONTRACTUAL GUARANTEE.

• Legally - being responsible in the event of an accident.

• Technically - to cause operating malfunctions or shorten the life of the lift truck.

BY USING ORIGINAL MANITOU PARTS FOR MAINTENANCE OPERATIONS, YOU WILL BENEFIT FROM OUR ADVANCED EXPERTISE

Through its network, MANITOU offers to the user,

• Know-how and competence.

• Guarantee of high-quality work.

• Original spare parts.

• Help with preventive maintenance.

• Efficient help with diagnostics.

• Improvements due to experience feedback.

• Operator training.

• Only the MANITOU network has a detailed knowledge of the design of the lift truck and therefore the best technical 

ability to provide maintenance.

t

 IMPORTANT 

t

ORIGINAL SPARE PARTS ARE DISTRIBUTED EXCLUSIVELY BY MANITOU AND ITS DEALER NETWORK. 

The dealer network list is available on the MANITOU website www.manitou.com.

Содержание MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Отзывы:

Нет отзывов