Manitou Systems 160 ATJ, Руководство оператора

Страница: 70 / 131

2 - 42
When the platform reaches the maximum authorised tilt or inclination. The buzzer sounds intermittently.:
- Return to a non-tilted, safe position.
The platform is tilted in the operating position: only the following movements are possible :
- Lowering of arms 1, 2 and 3 - Raising / lowering of the pendular arm
- Retraction of the telescope - Tilting / inclination
- Turret rotation
Any other movements are prohibited: (if necessary, or for particular applications), you can make
these movements by proceeding as follows:
- Press and hold down the tilt unlocking button on the console and press the desired command at the
same time.
Beeping remains activated even after engaging the tilt unlocking button.
Take care not to increase the platform's offset. There is a risk of overturning.
REMINDER: SEE PAGE 2-12
L
OWERING
When the work is complete: retract the telescope and then lower the arms to bring the platform to transport position.
Be careful of any people present on the ground when lowering the arms.
S
TOPPING THE PLATFORM
When the platform is not being used, switch off the electrical power supply using the key switch and the battery
cut-out. Remove the key to prevent unauthorised use.
Switch off the IC engine.
Before leaving the platfrom unattended, ensure that you have performed the operations for stopping the platform
correctly: this for your own safety and that of others.