Manitou Systems 160 ATJ, Руководство оператора

Страница: 93 / 131

3 - 19
D3 - D
RY AIR FILTER CARTRIDGE
REPLACE
The air used for combustion is purified via a dry air filter. It is therefore
forbidden to use the platform with a damaged cartridge or if it has been
removed.
- Open the left-hand cover.
- Release the clips 1 (Fig. D3/1) and remove the cover 2 (Fig. D3/1).
- Pull the filter cartridge 3 (Fig. D3/2) to release it and dispose of it.
- Leave the safety cartridge 4 (Fig. D3/2) in place.
- Clean the inside of the filter support with a clean, damp, non-fluffy cloth.
- Then fit the new filter and the cover.
If using the machine in a very dusty atmosphere, see the FILTER
ELEMENTS AND BELTS section.
D4 - F
UEL FILTER CARTRIDGE
REPLACE
- Open the left-hand cover.
- Carefully clean the exterior of the filter and its support to prevent any dust
from penetrating into the system.
- Loosen the retaining screw 1 (Fig. D4/1).
- Remove the tank 2 (Fig. D4/2) (beware of any diesel leaks) and dispose of
the cartridge 3 (Fig. D4/2) and its seals.
- Clean the inside of the filter head and the tank using a paintbrush
impregnated with clean diesel fuel.
- Refit the assembly with a new filter and new seals.
If necessary, purge the fuel supply circuit (see section G1).
D5 - I
NJECTORS
(CONSULT YOUR DEALER)
D3/1
D4/1
1
2
D3/2
4
3
1
D4/2
3
2