Manitou Systems 160 ATJ, Руководство оператора, Страница: 89 / 131

3 - 15
C10/1
C10/2
C10/3
1
C10 - T
URRET REDUCING GEAR BRAKE REDUCER LEVEL
CHECK
Set the platform on a horizontal surface with the engine stopped.
- Remove the turret's interior cover.
- The gear motor is revealed with the valve block facing to the back.
- Remove the filling-breather cap 1 (Fig. C10).
- The level is correct when the breather is full of oil.
- If necessary, restore the level with a syringe by filling the reducer via
the filling-breather cap. The oil capacity is 1.3 litres.
- Re-insert the filling-breather cap 1 (Fig. C10).
C11 - A
CCESS PLATFORM SLEW RING
GREASE
- The bearings and the gears must be greased every 250 hours of operation
and before and after a long standstill period.
- Grease to use: see the LUBRICANTS section.
- Remove the left-hand casing on the chassis (See Fig. C11/1).
- Find the 4 grease points 1 (Fig C11/2) and grease the ring thoroughly while
turning the turret.
- Put back the left-hand casing on the chassis (See Fig. C11/1).
- Apply lubricant to the crown and pinion gears using a paintbrush. (Fig.
C11/3).
- Lubricant to use: see the LUBRICANTS section.
C9
1