Manitou Systems 160 ATJ, Руководство оператора, Страница: 91 / 131

3 - 17
C13 - T
IGHTENING AXLE ASSEMBLY MOUNTING SCREWS ON THE FRAME
CHECK
- The bolts must be checked for tightness at the latest after 50 hours of operation. You must then repeat this check after
every 250 hours of operation.
- The tightening torque is 28.5 daN.m ± 10%
- 1 daN = 1 Kg.
C14 - A
RM POSITION SENSORS
CHECK
For this operation, fold the arms into transport position.
- Perform a travelling at transport speed
- Raise the arms or extend the telescope
- Move forward
- The platform should change to working speed.
In the event of dysfunction, forbid use of the platform.
Consult your dealer.
C15 - S
LOPE SENSOR
CHECK
For this operation, extend the arms.
- Position the platform on a steeper slope than is authorised (see : 2 - DESCRIPTION : SPECIFICATIONS).
- Movements to extend the telescope and raise the arms must be locked (the slope signal light is on in the basket, the
buzzer sounding intermittently in the basket).
In the event of dysfunction, forbid use of the platform.
Consult your dealer.
C16 - O
VERLOAD SENSOR
CHECK
For this operation, fold the arms into transport position.
- Place a heavier weight than is indicated in the basket (see : 2 - DESCRIPTION : SPECIFICATIONS).
- Movements to extend the telescope and raise the arms must be locked (the overload signal light is on in the basket,
the buzzer sounding continuously in the basket).
In the event of dysfunction, forbid use of the platform.
Consult your dealer.
C17 - M
ACHINE STICKERS
CHECK
(C
ONSULT YOUR DEALER
)