Manitou Systems 160 ATJ, Руководство оператора

Страница: 99 / 131

3 - 25
E2/2
E2 - F
UEL TANK
EMPTY - CLEAN
Never smoke or approach the tank with a naked flame during this operation.
Set the platform on a horizontal surface, rotate 90° so that the drain plug is
not over the chassis and stop the engine.
- Inspect visually and by touch the parts liable to have leaks on the fuel circuit
and the tank.
- In the event of a leak, contact your dealer.
Never attempt to weld or carry out any other operation yourself. This can
cause an explosion or a fire.
- Place a receptacle under the drain plug 1 (Fig. E2/1) and unscrew the drain
plug.
- Let the diesel flow out and rinse with ten litres of clean diesel via the filling
hole 2 (Fig. E2/2).
- Refit the drain plug 1 (Fig. E2/1) and tighten it down (tightening torque 3 to 4
daN.m).
- Fill the fuel tank with clean diesel filtered through a strainer or a clean, non-
fluffy cloth and refit the filling cap (Fig. E2/2).
E3 - D
RY AIR FILTER SAFETY CARTRIDGE
REPLACE
- Open the left-hand cover.
- Remove the dry air filter cartridge (see section C1).
- Remove the dry air filter's safety cartridge 1 (Fig. E3) and replace it with a
new one.
- Refit everything (see section C1).
E2/1
E3
1
1
2