Manitou Systems 160 ATJ, Руководство оператора

Страница: 100 / 131

3 - 26
E4 - F
RONT AND REAR AXLE DIFFERENTIAL OIL
EMPTY - REPLACE
Set the platform on a horizontal surface with the engine stopped and the
differential's oil already warm.
- Place a receptacle under the drain plugs 1 (Fig. E4/1: front axle) (Fig. E4/2:
rear axle).
- Remove the filling cap 2 (Fig. E4/1: font axle) (Fig. E4/2: rear axle) to ensure
good drainage.
- Place a receptacle under drain plug 4 (Fig. E4/3: differential).
Dispose of the drained oil in an environmentally friendly manner..
- Re-insert the drain plugs 1 (Fig. E4/1: front axle) (Fig. E4/2: rear axle) and
tighten them (tightening torque 8 daN.m) and (Fig. E4/3: differential
(tightening torque 8 daN.m)).
- Fill completely with oil (see the LUBRICANTS section) through the filling
hole 2 (Fig. E4/1: front axle) (Fig. E4/2: rear axle) and 4 (Fig. E4/3:
differential).
- The level is correct when the oil is flush with the hole.
- Check for any leaks around the drain plugs.
- Reinsert and tighten the filling cap 2 (Fig. E4/3: front axle) (Fig. E4/2: rear
axle) and 4 (Fig. E4/3: differential) (tightening torque 6 daN.m).
E5 - F
RONT AND REAR WHEEL REDUCER OIL
EMPTY - REPLACE
Set the platform on a horizontal surface with the engine stopped and the oil in
the reducers warm.
- Drain and replace the oil in each reducer on the front wheels.
- Set the drain plug 1 (Fig. E5) in position A.
- Place a receptacle under the drain plug and unscrew it.
- Let the oil drain completely.
Dispose of the drained oil in an environmentally friendly manner.
- Set the drain hole in position B, i.e. to level-checking hole.
- Fill completely with oil (see the LUBRICANTS section) through the filling
hole 1 (Fig. E5).
- The level is correct when the oil is flush with the hole.
- Reinsert and tighten the drain plug 1 (Fig. E5) (tightening torque 8 daN.m).
- Repeat the same operation for each reducer on the rear wheels.
E4/1
1
2
E4/2
1
2
E4/3
3
4
E5
3
A
1 B