3
Mount the monitor
Remove the monitor from the shaft handle, transfer and
secure to the handle of the RTC using the two screws and
Velcro strips
.
Connecting it all up
1
Connect cables to the monitor
Connect the longer combined power/data cable supplied
with the RTC to the monitor.
Note:
Look for the countersink in the power cable and place it
towards the mark on the connection. Push lightly. If you have it
in the correct position it will go in its position smoothly. To dis-
connect, pull out holding the metal part of the connection.
2
Connect cables to the control unit
Connect the combined power/data to the front of the
antenna.
Содержание Easy Locator HDR
Страница 1: ......
Страница 2: ...MAL Easy Locator HDR User Manual Guide for Operating MAL Easy Locator HDR...
Страница 4: ...MAL Easy Locator HDR User Manual by MAL Geoscience MAL Geoscience Press...
Страница 49: ...See the GPS Parameter Menu section for more information about setting these parameters...