21
ENGLISH
Troubleshooting for wireless activation function
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace
-
ment parts f or repairs.
State of abnormality
Probable cause (malfunction)
Remedy
T h e w ireless ac tiv ation lamp d oes
not ligh t/ blink.
T h e w ireless unit is not installed into th e tool.
The wireless unit is improperly installed
into th e tool.
Install the wireless unit correctly.
T h e terminal of th e w ireless unit and / or
the slot is dirty.
Gently wipe off dust and dirt on the terminal of the
w ireless unit and c lean th e slot.
T h e w ireless ac tiv ation button on th e
tool h as not been push ed .
P ush th e w ireless ac tiv ation button on th e tool
briefly.
The stand-by switch on the vacuum
c leaner is not set to " A U T O " .
Set the stand-by switch on the vacuum cleaner to
" A U T O " .
No power supply
Supply the power to the tool and the vacuum cleaner.
Cannot finish tool registration / can
-
celling tool registration successfully.
T h e w ireless unit is not installed into th e tool.
The wireless unit is improperly installed
into th e tool.
Install the wireless unit correctly.
T h e terminal of th e w ireless unit and / or
the slot is dirty.
Gently wipe off dust and dirt on the terminal of the
w ireless unit and c lean th e slot.
The stand-by switch on the vacuum
c leaner is not set to " A U T O " .
Set the stand-by switch on the vacuum cleaner to
" A U T O " .
No power supply
Supply the power to the tool and the vacuum cleaner.
I nc orrec t operation
Push the wireless activation button briefly and perform
th e tool registration/ c anc ellation proc ed ures again.
The tool and vacuum cleaner are away
from each other (out of the transmission
range).
G et th e tool and v ac uum c leaner c loser to eac h oth er.
The maximum transmission distance is approximately
m however it may vary according to the circumstances.
Before finishing the tool registration/
c anc ellation;
- th e sw itc h trigger on th e tool is pulled or;
- th e pow er button on th e v ac uum
c leaner is turned on.
Push the wireless activation button briefly and
perf orm th e tool registration/ c anc ellation proc ed ures
again.
T h e tool registration proc ed ures f or th e
tool or vacuum cleaner have not finished.
P erf orm th e tool registration proc ed ures f or both th e
tool and th e v ac uum c leaner at th e same timing.
Radio disturbance by other appliances
which generate high-intensity radio waves.
Keep the tool and vacuum cleaner away from the appli
-
ances such as Wi-Fi devices and microwave ovens.
T h e v ac uum c leaner d oes not run
along w ith th e sw itc h operation of
th e tool.
T h e w ireless unit is not installed into th e tool.
The wireless unit is improperly installed
into th e tool.
Install the wireless unit correctly.
T h e terminal of th e w ireless unit and / or
the slot is dirty.
Gently wipe off dust and dirt on the terminal of the
w ireless unit and c lean th e slot.
T h e w ireless ac tiv ation button on th e
tool h as not been push ed .
Push the wireless activation button briefly and make
sure th at th e w ireless ac tiv ation lamp is blinking in blue.
The stand-by switch on the vacuum
c leaner is not set to " A U T O " .
Set the stand-by switch on the vacuum cleaner to
" A U T O " .
More th an 1 0 tools are registered to th e
v ac uum c leaner.
P erf orm th e tool registration again.
I f more th an 1 0 tools are registered to th e v ac uum
c leaner, th e tool registered earliest w ill be c anc elled
automatically.
T h e v ac uum c leaner erased all tool
registrations.
P erf orm th e tool registration again.
No power supply
Supply the power to the tool and the vacuum cleaner.
The tool and vacuum cleaner are away
from each other (out of the transmission
range).
G et th e tool and v ac uum c leaner c loser eac h oth er. T h e
maximum transmission distance is approximately m
however it may vary according to the circumstances.
Radio disturbance by other appliances
which generate high-intensity radio
w av es.
Keep the tool and vacuum cleaner away from the
appliances such as Wi-Fi devices and microwave
ov ens.
T h e v ac uum c leaner runs w h ile th e
tool s switch trigger is not pulled.
O th er users are using th e w ireless
ac tiv ation of th e v ac uum c leaner w ith
th eir tools.
T urn of f th e w ireless ac tiv ation button of th e oth er
tools or c anc el th e tool registration of th e oth er
tools.
Содержание DHS782
