Makino V55, Руководство по обслуживанию

Страница: 512 / 568

A - 44
ER3
2 NO I/O DEVICE No external I/O unit is connected.
ER3
3 SLC ERROR The LSI chip for I/O Link is defective.
ER3
4 SLC ERROR (xx) The LSI chip in the I/O unit of group xx is defective
or a transmission error has occurred.
ER3
5 TOO MUCH OUTPUT
DATA IN GROUP (XX) The length of output data in group xx exceeds 32
bytes. Excessive data is ignored.
ER3
6 TOO MUCH INPUT
DATA IN GROUP (XX) The length of input data in group xx exceeds 32
bytes. Excessive data is ignored.
ER3
7 TOO MUCH SLOT IN
BASE The number of slots exceeds 10. The eleventh and
subsequent slots are invalid.
ER3
8 MAX SETTING OUT-
PUT DATA OVER (xx) The capacity of the I/O area is insufficient. Assigning
output group xx or groups having larger numbers is
invalid.
ER3
9 MAX SETTING INPUT
DATA OVER (xx) The capacity of the I/O area is insufficient. Assigning
input group xx or groups having larger numbers is
invalid.
WN
01 LADDER MAX SIZE
ERROR The MAX LADDER AREA SIZE in the system
parameter is illegal.
WN
02 OPERATOR PANEL
ADDRESS ERROR The address setting data of the operator's panel for
FS-0 is illegal.
WN
03 ABORT NC-WIN-
DOW/EXIN LADDER was stopped while CNC and PMC were
communicating.
WN
04 UNAVAIL EDIT MOD-
ULE The LADDER editing module cannot be recognized/
WN
06 TASK STOPPED BY
DEBUG FUNC Some user tasks are stopped by break point of the
debugging function.
WN
07 LADDER SP ERROR
(STACK) When functional instruction CALL(SUB65) or
CALL(SUB66) was executed, the stack of the ladder
overflowed.
WN
17 NO OPTION (LAN-
GUAGE) The LANGUAGE option was not found.
WN
18 ORIGIN ADDRESS
ERROR The LANGUAGE ORIGIN address is out of range.
PMC Alarms (continued)
No. Message Contents
† If any alarm, ER00 - ER23, is issued, a sequence program does not
start.
‡ Alarm messages WN17 to WN33 indicate errors related to PMC-RC
user C programs.