Makino V55, Руководство по обслуживанию

Страница: 24 / 568

1 - 16
1.9 V55 Vertical Machining Center Safety
In addition to safety precautions for all machining operations, the energy
generated by HSM (High-Speed Machining) requires special safety con-
siderations that must be fully understood by the operator.
1.9.1 Machine Safety Features
The Makino V55 provides the following safety features:
• Manual handle interrupt buttons, located on auxiliary operation panels,
to prevent automatic operation of that unit, when active.
• S/G (Splash Guard) door interlocks, to halt machining operations when
the splash guard doors are opened.
• [EMERGENCY] buttons, to immediately halt all machine functions.
Descriptions, operational detail, and precautions related to these safety
features are described in the Operation Guide.
1.9.2 Location of Emergency Stop Buttons
[EMERGENCY] buttons are located, as shown:
• Main operation panel –
Figure 1-1
.
• ATC (Automatic Tool Changer) operation panel –
Figure 1-2
.
• MTC (Machine Tool Cabinet) door –
Figure 1-3
(pg. 1-18)
.
• MPG (Manual Pulse Generator) [option].
• APC (Automatic Pallet Changer) operation panel [option].
1.9.3 Location of Safety Labels
Labels attached to the machine at specific areas, identify safety risks and
provide important instructions that must be read and followed.
• S/G Door –
Figure 1-1
.
• Front of Spindle –
Figure 1-4
(pg. 1-18)
.
• ATC Magazine Door –
Figure 1-2
.
• Scraper Conveyor –
Figure 1-3
(pg. 1-18)
.
• Lift-up Chip Conveyor [option] –
Figure 1-5
(pg. 1-19)
.