MAHLE ACX150, Руководство пользователя

Страница: 19 / 198

EN | 19 | ACX150/250 | Setup
© MAHLE
8.4 UV dye bottle filling
The UV Dye is a substance made up of a
yellow-green coloured fluorescent
pigment, which means that, when lit by
an ultraviolet lamp, it becomes
fluorescent and thus visible.
The UV dye can therefore be used to
detect leaks of a small entity inside the
auto vehicle A/C system.
To fill the UV dye bottle (Fig.1 Pos. 6) it
has to be extracted from its housing by
means of the quick coupler on the top of
the bottle; slightly press downward the
coupler ring nut to extract it.
Fill the bottle by paying special attention
to the “oil care” valve.
This valve is made of a silicon polymer
membrane; it compensates pressure
variations within the bottle and stops
humid air infeed inside thus preserving
the new oil inside.
After filling, close the bottle and place it
back in its seat.
9 Setup
From the SETUP menu it is possible to
select parameters and activations before
starting cycle:
ELECTRIC COMPRESSOR FUNCTION

by selecting this entry, one may
change the type of Oil to inject into
the A/C system.
E³ CONNECT

by selecting this entry, you can
enable the E³ CONNECT function
(the E³ CONNECT quick coupler
must be present on the car).
CHARGE MODE

by selecting this entry, one may
decide whether to enable use of the
Quick Mode or Zero Tolerance
charge method
AC PERFORMANCE TEST

by selecting this entry, one can
enable or disable the AC
PERFORMANCE TEST.
REFRIGERANT CLEAN

by selecting this entry, one may
decide whether or not to enable the
refrigerant clean function, which
enables an additional recycling,
within the station itself, started in
automatic when it is switched on but
not in use. This function ensures a
higher level of purity of the recycled
refrigerant to the advantage of the
service quality.
RECOVERED GAS AND OIL PRINTING

selecting this entry, you can choose
whether you want to enable
displaying and printing of the
recovered gas quantity. Setting
available only with printer installed.
REPORTS SAVING MODE

by selecting this entry, you can save
the reports of the performed charges
(automatic cycle or Reg. 842/2006).