Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
34
Correct fitment/ identification of
Front Suspension Bushes
–
Upper arm is fitted with voided bush on both sides.
Lower arm is fitted with voided bush at its rear end.
Ensure that while fitting the voided bush on Upper arm or lower arm rear end,
the Bush solid rubber portion should be parallel to the Arm.
Avoid wrong fitting
of voided bush
VOIDED BUSH - CORRECT POSITION ON
LOWER ARM
The washer has to
be crimped to
ensure bush
performance;
Refer
SOP in Repair
Manual
VOIDED BUSH - CORRECT POSITION
ON UPPER ARM
BUSH-LCA FRONT END
BUSH-LCA REAR END
BUSH - UCA
Upper Control Arm
UCA bush correct fitment
LCA bush correct fitment
Lower Control Arm
