Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
49
705-MAT-0035 : 0.20 hrs
HVAC FILTER – CLEAN
•
Clean mesh every service interval.
•
Check the entire system for leaks and recharge if required.
HVAC FILTER - CLEAN
Refer above illustrations -
1.
Open and remove the Glove Box. Refer illustration
[A]
2.
Remove the Glove box stay brackets. Refer illustration
[B].
3.
Remove the HVAC Filter Cover by opening the snap clips on both sides.
4.
Take out HVAC Filter Element, Refer illustration
[C].
5.
Clean the Filter Element with pressurised air flow (If compressed air is used, ensure
the pressure is low). If the filter tray found very dusty it can be cleaned by clean
water and soap solution and then dry it with help of low pressure air blow.
6.
Fit the cleaned HVAC Filter & Cover; lock the snap clips on both sides.
7.
Fit the Glove Box support brackets properly.
8.
Check Glove box for proper opening and closing.
Clean the HVAC filter with water/soap
solution if it is very dusty and then use
low air pressure.
D
Remove the HVAC filter tray
C
Remove the Glove box stay supports
B
Open the Glove box assembly
A
