Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
45
705-MAT-0033 : 0.30 hrs
LIGHTS/ HORN/ WIPER/ WASHER - CHECK
1.
Turn indicator – Left
2.
Check Engine Lamp
3.
Head Lamp indicator – main beam
4.
Charging system warning lamp
5.
Engine overheating indicator
6.
Turn indicator – right
7.
Auto Start Stop* (*Where fitted)
8.
Low oil pressure indicator
9.
Parking brake indicator
10.
Brake system warning indicator
11.
Water in fuel indicator
12.
OBD/ MIL
Check lights /wiper/washer/horn/ hazard switch operations –
Wiper and washers – Wiper/ Washer Control Lever Lighting Control – Turn Indication
Wash/ Wipe
functions can be activated with the ignition key at the IGN position.
•
Flick-Wipe (MIST)
Push the stalk up from the normal position to position
A
for wipe only
and it operates as long as stalk is in position.
•
OFF
Stalk is in normal position
B
.
•
Intermittent (INT)
Push the stalk down from the normal position to position
C
intermittent
(INT) wiping is selected.
•
Low Speed Wiping (LO)
Push the stalk further down to the position
D
.
•
High Speed Wiping (HI)
Push the stalk again down to the position
E
.
•
Wash/Wipe
When the front washer is selected, washer fluid is sprayed on the front
windshield and the wipers will wipe the screen 3 times after the washer spray is stopped
and will wipe once after 5 sec.
Check all instruments & gauges in instrument cluster for proper operation
.
Refer illustrations –
**Some of the cluster indication may not able to simulate. That can only seen for few seconds as soon as
ignition switch is ‘ON’
