Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
35
705-MAT-0026 : 0.20 hrs.
REAR SUSPENSION BUSHES (SHACKLE & PIVOT) - INSPECT
Rear Suspension Shackle & Pivot bushes to be inspected at every 20000 kms.
Refer below chart for Rear Suspension torque values.
REAR SUSPENSION (Leaf Spring)
U bolt
130 ± 10 Nm
Assembly Shackle plate & Pin
60 ± 10 Nm
Leaf spring end pivot
60 ± 10 Nm
Assembly Plate end pivot
25 ± 10 Nm
Rear Shock Absorber LH/RH Top/Bottom bolts
50 ± 10 Nm
Suspension – Shackle & Pivot
SUSPENSION BUSHES (SHACKLE & PIVOT)
REAR
- CHECK
Refer illustrations shown.
1.
Check the Shock Absorber bushes for wear, cracks & damage.
2.
Check & ensure the lower & upper mounting nut torque.
3.
Check the leaf spring bushes for wear, cracks & damage. Check & ensure the nut torque
at pin end & shackle end.
4.
Grease shackle Pins; in case of Rigid Suspension.
