MAHA CONNECT Series, Оригинальная инструкция по эксплуатации, Страница: 46 / 138

46
BA023001-en
9 Remove the transport lock (marked red) with ratchet and extension WAF 17 and
dispose of it. The transport lock must be removed on the left and right.
10 Adjust the test bench to the desired level (e.g. level with the floor) using the 4
levelling screws (marked red) with ratchet and extension WAF 17. Make sure that
the test bench does not jam. It is advisable to gradually adjust the level in a
clockwise direction. The level of the upper edge of the frame can be variably
adjusted from 245...300 mm.
NOTICE
If the test bench is lowered further than 280 mm, make sure that the cables are not
pinched or kinked.
11 Then refit the sensing roller spiral spring, the kick plate, the bearing cover and the
middle cover in reverse order.
The split version is mounted per roller set half identically to the unsplit roller set.