Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 13 of 44
3.1
INSTALLING BATTERY PACK
Prior to utilizing the MLTX2 transmitter, the battery pack must be installed.
3.1.1
Approved Batteries for Intrinsically Safe Operation
The MLTX2 transmitter has been tested and approved for intrinsically safe operation with the following AA
(LR6) size batteries:
Duracell
MN1500
Duracell
PC1500
Energizer
E91
Panasonic
LR6XWA
Rayovac
815
Use only the above battery manufacturers and part numbers as replacement batteries to maintain
intrinsically safe operation.
WARNING
ONLY OPERATE THE TRANSMITTER IN HAZARDOUS ENVIRONMENTS WITH THE APPROVED BATTERIES.
FAILURE TO USE THE APPROVED BATTERIES COULD RESULT IN SERIOUS INJURY OR DEATH AND
DAMAGE TO EQUIPMENT. ONLY USE FOUR BATTERIES OF THE SAME MANUFACTURER AND MODEL
NUMBER.
3.1.2
Intrinsically Safe Alkaline Battery Pack
The Intrinsically Safe MLTX2 comes standard with an intrinsically safe battery pack that holds four
disposable AA alkaline batteries.
Figure 2: Intrinsically Safe Battery Pack (Top and Bottom Views)
To change the alkaline batteries in the battery pack, loosen the T10 star bit screws completely and
remove the battery pack lid. Replace all the batteries with new ones.
