Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 39 of 44
2.
Click the “send” button on the RCP screen. A dialog box will pop up confirming that you want to
proceed. Check the box marked “I accept,” and then click the button “Continue send to radio.”
On-screen prompts will confirm that the receiver has been programmed or if there are any issues.
3. Data will need to be sent separately for the Unit Info and CAN Configuration screens.
Receiving (Reading) the MLTX2 Programming
To read a program file from the MLTX2 Transmitter:
1. Utilize the programming cable from the computer to the RCP programming adapter and turn the
radio Transmitter on
2.
Click “Receive” and follow on-screen prompts.
3. RCP will confirm reception and automatically display current programming in the MLTX2 unit.
Reading the RCP Software Version
1.
Select “Help”.
2.
Select “About”.
3. The RCP Software Version number will be displayed.
Resetting MLTX2 Back to Factory Default Settings
1.
Select “Reset to Defaults” button.
2.
A dialog box will pop up confirming that you want to proceed. Click the button “OK” to restore the
factory default settings. On-screen prompts will confirm that the transmitter has been reset to
defaults or if there are any issues.
3. Power cycle the MLTX2 transmitter to implement the factory default values.
NOTE: Resetting the system back to factory defaults only restores the factory settings for the CAN
configuration settings. All other settings will not be altered.
