Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 23 of 44
WARNING
ONLY PERFORM SETTING CHANGES TO THE DIP SWITCH BLOCK THROUGH THE IR PORT IN A NON-
HAZARDOUS ENVIRONMEN
T OR “SAFE” ZONE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN
SERIOUS INJURY OR DEATH, AND DAMAGE TO EQUIPMENT.
Figure 7: Dip Switch Block as Viewed Through USB/IR Port
NOTE: The dip switch block switches are oriented so that the Off position is next to the number
designator and the On position is up or away from the number designator.
Regardless of which radio frequency the transmitter was equipped with the RF channel dip switch
settings are the same. Refer to Sections 6.2 and 6.3 for details on the specific RF channel details for the
radio frequency that the transmitter is equipped with.
The following figure details the dip switch positions for each RF channel.
