Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 40 of 44
6
TRANSMITTER RF CHANNEL CONFIGURATION SETTINGS
The RF channel can be set via the dip switch block when not through the RCP IR settings (depending on
DIP1 SW3). Section 6.2 shows the channels and protocols available for each transmitter radio frequency
option.
6.1
FCC/ATEX/IECEX STATEMENTS
See “Enrange XLTX/MLTX2 Transmitter ATEX/IECEx Information” sheet, Magnetek PN 198-80202-0003,
for details regarding the hazardous location approvals for this product.
Compliance Statement (Part 15.19)
This device complies with Part 15 of FCC
rules.
Operation is subject to the following two
conditions:
1.
This device may not cause harmful
interference, and
2.
This device must accept any
interference received, including
interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly
approved by the party responsible for
co
mpliance should void the user’s
authority to operate the equipment.
This portable transmitter with its antenna
complies with FCC’s RF exposure limits
for general population/uncontrolled
exposure.
