TER Ceska
Flex EX 4, Flex EX 6
Instruction manual
9.13. Changing Transmitter Batteries
Change the transmitter batteries by unscrewing the battery cover located on the backside of the transmitter (refer to Fig. 6).
During battery installations make sure that the black ribbon is centered between the two batteries. After changing the
batteries make sure that all screws are tightened to avoid water, moisture, dirt, grease, or other liquid penetration.
Use 2 standard AA (LR06), non-rechargeable batteries 1,5V or rechargeable 1,2V or special rechargeable battery kit.
Page 20 of 27
December 2015
Fig. 5: Automatic channel scanning operating procedure
Fig. 6: Changing transmitter batteries
